Description
The Poolife Endure Water Conditioner (20 pounds) is a highly effective product that will help make pool water softer and more enjoyable. This product will also help clarify the water, leaving the pool crystal clear for bathers to enjoy. Use this product to improve both water clarity and filtration efficiency.
Not sure how much you need?
Here’s the dosage info:
- Add two pounds per 1,000 gallons of pool water.
Directions
- Sanitize with bromine, chlorine or biguanide (PHMB), backwash, and clean your filter.
- Balance your pool water and adjust pH between 7.2 – 7.6.
- Add two pounds of this product per 1,000 gallons of pool water by broadcasting the product over the surface of the pool with the pump running following these directions:
-
- Add the initial treatment in three doses, with one-third of the required amount added to each application.
- Brush any undissolved product from the bottom of the pool.
- The pH of the water rises as a normal reaction to the introduction of this product. One hour after each application, adjust the pH to 7.2 – 7.6 with a decreaser according to the label directions.
- Allow at least eight hours between the applications of this product. Do not add additional products until the pH is between 7.2 – 7.6 (Note: For every two lbs of this product, approximately one lb of pH decreaser is required for pH adjustment).
- Within 10 days, bring us a water sample so we can test your water balance and determine if you have added enough of this product.
