BioGuard Scale Inhibitor

Description

BioGuard Scale Inhibitor prevents scale build-up from high calcium levels and prevents stains caused by iron, copper and manganese.

Regular use of this concentrated formula prevents scale build-up on pool surfaces, piping, filtration, and heating elements. Scale Inhibitor doesn’t affect pH and will continue working 3-4 weeks after application.

 BioGuard Scale Inhibitor

• Protects pool equipment from scale build-up and metal stains
• Prevents and removes metal stains and scale on pool surfaces
• Prevents cloudy water due to high calcium level
• For chlorine- or bromine-treated pools

Balance your water to prevent problems.

Keeping the right balance in your swimming pool water is important. Balancers control scale, prevent metallic stains, adjust pH and total alkalinity and correct mineral imbalances.

How important is pH really?

Having the correct pH in your pool is crucial to your swimmers’ comfort and also protects your pool equipment and surfaces from corrosion, staining and etching. The ideal pH range is 7.4-7.6. If the pH is too high or too low it can cause those pesky red, itchy eyes!

Dosage for Initial Treatment:

• 32 fl oz per 10,000 gallons of water

Dosage for Maintenance Treatment:

• 16 fl oz per 10,000 gallons of water per month

Dosage for Removal of Fresh Stains:

• 32 fl oz per 10,000 gallons of water

Directions for Initial Treatment:

Backwash filter according to manufacturers directions. With the pump running add 1 quart of this product per 10,000 gallons of water, pouring product directly into the pool. Continue to run pump for 24 to 48 hours after this addition.

Directions for Maintenance Treatment:

For the maintenance dose, apply 16 fl. oz. of this product per 10,000 gallons of pool water once a month. Add product directly to pool water with pump on. Maintenance doses should be used for pools in areas where excessive hardness or metals cause constant scale and staining problems.

Directions for Fresh Stain Removal:

Many fresh (less than 5 days old) metallic stains can be removed by this product. Add this product at a rate of 1 quart per 10,000 gallons of water. Apply directly to the pool in the area of the stains. Brush the stained area daily for 3 to 5 days. Large metal stains may require repeat treatments. Where metal stains have aged into the pools surface, draining and acid washing is recommended for white plaster pools only. Consult us for help.