Power, cleaning, wood, the Tylö app and the short list of yearly checks
A home sauna in Tulsa is easy to own once you learn its rhythm. Fiesta Pools and Spas sells indoor Tylö saunas at 93rd and Sheridan. Kiruna infrared models run on the Tylö app with Aspire Controls, Halmstad traditional models use Bliss Controls, and upkeep is mostly airing it out, wiping benches and a few yearly checks.
Here’s what surprises new owners. A sauna asks for less care than a hot tub, a lawn mower or the car. There’s no water to balance in an infrared cabin and only a ladle’s worth in a traditional one. What it does need is a few habits done every time, plus a short checklist once a year. Skip those and the wood darkens, the benches get grimy and the room starts to smell like an old gym bag. Keep them and the cabin looks and smells close to new for a long time.
This page is about the years after delivery day. If you’re still picking between heat types, start with the sauna session guide and come back once you own one.
What each Tylö model asks of your electrical
Every model Fiesta lists has its own heat source, controls and power rating. Knowing yours tells you what’s normal and what’s worth a call.
| Model | Heat source | App controls | Listed power |
|---|---|---|---|
| Kiruna 2 | CarbonFlex infrared emitters | Aspire Controls | 120V, 15 amp |
| Kiruna 3 | CarbonFlex infrared emitters | Aspire Controls | 120V, 20 amp |
| Halmstad 2 | Sense Mini 1 or 2 heater and rocks | Bliss Controls | 120V, 15 or 20 amp |
| Halmstad 3 | Sense Bliss 6 heater and rocks | Bliss Controls | 240V, 25 amp |
The listed circuit gives you a rough feel for how much power each model pulls while it heats. The Halmstad 3, on its 240-volt, 25-amp line, draws the most, which makes sense for the biggest cabin with a full rock heater. The two Kiruna models and the Halmstad 2 sit on 120 volts. Your monthly electric bill will track how often you run the sauna and for how long far more than which model you picked, so the simplest way to keep running costs in check is to heat it when you’ll use it and shut it off when you’re done.
A few running habits help:
- Don’t leave the heat on for hours as a habit. Warm the cabin for your session, then turn it off.
- Keep the sauna’s circuit for the sauna. If the breaker trips, don’t keep resetting it. Call a licensed electrician.
- Notice how long your cabin takes to warm in July versus January. A house kept cool in winter means a longer warm-up, and that’s normal.
- If the heat ever seems weaker than it used to, write down what you see before you call. It makes the conversation with the store much faster.
How do you clean a home sauna?
You clean a home sauna mostly with water, a soft cloth and good habits, and very little else. Sweat is the main thing you’re fighting. It soaks into bare wood, and over months it shows up as dark patches where backs and hands rest.
After each session, prop the door so air moves through the cabin and dries it, hang your towel outside and give the bench a quick wipe if it’s damp. Once a week, wipe the benches, backrests and floor with a cloth wrung out in warm water. A mild soap is fine if the Tylö manual allows it. Then leave the door open until everything is fully dry.
What to keep out of the cabin is just as important:
- Bleach, ammonia and harsh household sprays. Fumes linger and heat makes them worse.
- Pressure washers and soaking the floor. Standing water is the enemy of a wood cabin.
- Scented oils poured on the heater or rocks unless Tylö’s manual says a product is safe for that use.
- Rubber-backed mats that trap moisture against the floor.
Caring for the wood
The wood is the sauna, and it ages based on how you treat it. A few points keep it looking right:
- Sit on a towel every time. It’s the single biggest thing you can do for the benches.
- Let the wood dry fully between sessions. Damp wood that never dries is where stains and smells start.
- Don’t paint, varnish or seal the inside of the cabin unless the Tylö manual tells you to. Interior sauna wood is usually left bare, since coatings can turn sticky or give off odors in high heat.
- Lightly sand stubborn sweat marks on benches if the manual allows it, and wipe away the dust before the next heat-up.
- Keep shoes, food and drinks other than water out of the cabin. Spills soak in fast.
Wood color shifts over the years. That’s normal, and it’s part of a well-used sauna. Even, gradual darkening is fine. Patchy black spots or a musty smell are signs the cabin isn’t drying out between uses.
Getting the most from the Tylö app
Both collections are run through the Tylö app. Kiruna owners use Aspire Controls, and Halmstad owners use Bliss Controls. Spend fifteen minutes with the app on delivery day, before your first real session. Learn how to set the heat, turn it off, and adjust the chromotherapy lighting and Bluetooth sound.
The Kiruna’s lighting runs internal and external LEDs in six colors, so you can pick a mood for the cabin and for the room around it. On both collections, Bluetooth lets you pair a phone for music or a podcast. Keep the app updated, and if a phone update ever breaks the connection, try removing and re-pairing the sauna before you assume something’s wrong with the unit.
Halmstad rocks and heater care
A traditional sauna has one extra piece to look after: the stone bed over the heater. Pour water on the rocks only, never on the heater body or the controls, and use plain water unless the manual approves something else.
Sauna stones crack and crumble slowly after many heat cycles. Once a year, or sooner with heavy use, check the manual for how Tylö wants the rocks inspected and restacked, and pull out any broken pieces. A tightly packed or crumbling stone bed can block airflow around the heater. ThermoSafe is part of the Halmstad design, but it’s no excuse to drape towels near the heater. Keep fabric well clear.
Kiruna emitter and lighting care
Infrared cabins are even simpler. There are no rocks and no steam, so the job is keeping the emitters clean and clear. Don’t hang towels or clothes over the CarbonFlex emitters, and don’t lean wet items against them. Dust them with a dry, soft cloth when the cabin is off and cool. If one panel ever seems colder than the others during a session, note which one and call the store.
What does yearly sauna upkeep look like?
| When | Task | Why it matters |
|---|---|---|
| After every session | Door open, towel out, quick bench wipe | Dry wood stays clean and smells fresh |
| Weekly | Wipe benches, backrests and floor with warm water | Stops sweat from building up |
| Monthly | Check the door closes and seals well, look for loose trim | Small fixes stay small |
| Twice a year | Dust emitters or check the rock bed, test lights and sound | Catches problems before a session does |
| Yearly | Light sanding of marked benches if allowed, full manual review | Keeps the cabin near new |
| Anytime | Breaker trips, odd smells, weak heat, app errors | Stop using it and call for help |
Keep the owner’s manual and your purchase paperwork in one folder near the sauna or saved on your phone. When something needs attention, the model name and purchase date are the first things anyone will ask for.
When you do need help, call or stop by the 93rd and Sheridan store. Owners in Bixby, Jenks and south Broken Arrow usually find it the quickest drive. And if you haven’t bought yet, Fiesta offers sauna financing on the Tylö models listed on the sauna page.
Talk to your doctor first if heat is a concern
Before a home sauna becomes part of your evening, check with your doctor if you’re expecting, have a heart condition, or have been told your blood pressure needs watching. The same goes for medicines that affect sweating or make you drowsy. We’re a sauna store, not a clinic, so treat this page as buying advice only. Keep sessions short at first, have water nearby and step out the moment you feel unwell.
Home sauna care questions
How do you clean a home sauna?
You clean a home sauna with warm water and a soft cloth on the benches, backrests and floor about once a week, plus airing it out after every session. Skip bleach and harsh sprays, keep water off the heater and controls, and always let the wood dry fully before you close the door.
Should you seal the wood inside a sauna?
You shouldn’t seal the wood inside a sauna unless the maker’s manual tells you to. Interior sauna wood is usually left bare, because varnish and paint can get tacky or release odors in high heat. Protect it with towels and good drying habits instead, and check your Tylö manual before using any product.
How much does it cost to run a home sauna?
The cost to run a home sauna depends on your model’s power draw, your electric rate and how often and how long you use it. Fiesta doesn’t post running costs. Of its Tylö models, the 240-volt Halmstad 3 draws the most, and heating only for your session keeps any model’s bill down.
How often should you replace sauna stones?
Sauna stones should be replaced when they crack or crumble, which happens slowly as they heat and cool over and over. Check the rock bed on a traditional sauna like the Halmstad at least once a year, remove broken pieces and follow the Tylö manual for restacking or replacing them.
Can you leave a home sauna on all the time?
You shouldn’t leave a home sauna on all the time. It wastes electricity, keeps the wood under constant heat and leaves a hot cabin unattended. Warm it up for the session you’re about to take, then turn it off in the Tylö app and leave the door open so it dries.
Questions about your sauna? Stop by 93rd and Sheridan
Bring your model name to 9241 S Sheridan Rd. Check the current store hours first. The team can talk through care, the app or anything that doesn’t seem right.
Fiesta Pools and Spas, 93rd and Sheridan
9241 S Sheridan Rd, Tulsa, OK 74133
(918) 494-0133
More from our 93rd and Sheridan store
- Outdoor sauna in south Tulsa
- Cold plunge tub at 93rd and Sheridan
- Cold plunge at our South Sheridan location
Ready for real numbers? Request sauna pricing and the 93rd and Sheridan team will get back to you.
Hours, directions and phone for this location are on the Fiesta’s 93rd and Sheridan store, 9241 S. Sheridan Rd. page.
